: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
044 Trunk access code sent to
SMDR for outgoing call/
Trunk Access Code for
Trunk-Direct Appearance
Multiline Operation
000
or
999
NONE
When a trunk is seized by a Trunk
Appearance key or LCR, one or two-digit code
(00-99) is sent out to the SMDR.
No data
CM35 Y=189
NOTE: When both CM35 Y=044 and CM35 Y=189 are set to the same trunk route, the setting of CM35 Y=189
is effective.
046 DP/DTMF sender release
timing
0
1
2
3
4
5
6
7
2 seconds
4 seconds
6 seconds
8 seconds
12 seconds
14 seconds
16 seconds
10 seconds
048 Sending Busy/Idle informa-
tion to network
[North America Only]
0
1
Not available
Available
Backward signal when
address is completed on DID
[8300R3.5]
0
1
Set up speech condition without waiting FW
GII
Waiting FW GII
NOTE: For Brazil, this data must be set to 1.
049 SMDR for incoming call 0
1
To provide
Not provided
CM13 Y=05
051 Restriction of outgoing con-
nection
(Unrestricted) (RCA)
0
1
Restricted
Allow
CM12 Y=01
CM35 Y=097
052 Restriction of outgoing con-
nection
(Non-Restricted-1) (RCB)
0
1
Restricted
Allow
053 Restriction of outgoing con-
nection
(Non-Restricted-2) (RCC)
0
1
Restricted
Allow
Continued on next page
To Next Page
Loading...
