: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
034 Multiline Terminal Ringer
Tone Pattern on incoming
calls
0
1
2
3
See below CM08>390
CM15 Y=083, 084
CM65 Y=40
Multiline Terminal ringer tone pattern is assigned by the following combination of CM35 Y=034 and 164.
036 Trunk seizure facility 0
1
After dialing maximum number of digits
After completing dialed digits entered in CM8A
Y=4005-4007
CM8A
Y=4005-4007
037 MF Signaling/Caller ID/
MFC Signaling on DID
0
1
Available
Not available
038 MFC Signaling on DOD/
Enhanced 911
0
1
Available
Not available
039 Trunk release by detecting
reversal of tip and ring on
outgoing C.O. call
0
1
Not released
To release
040 Abbreviated Codes for speed
calling for routing to C.O.
line when all tie lines are
busy
00
31
NONE
Abbreviated Codes for System Speed Dialing
assigned by CM71>66
No data
CM71>66
CM72
Continued on next page
: Default
NOTE: For the Ringer Tone Pattern, see CM65 Y=40.
Y=34 Y=164: 0 Y=164: 1
0 Ringer Tone Pattern 3 Ringer Tone Pattern 0
1 Ringer Tone Pattern 6 Ringer Tone Pattern 1
2 Ringer Tone Pattern 5 Ringer Tone Pattern 2
3 Ringer Tone Pattern 4 Ringer Tone Pattern 7
To Next Page
Loading...
