: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
145 Calling party information
transfer to ISDN on tandem
call from CCIS/SIP
0
1
To provide
Not provided
Calling party information
transfer to Enhanced 911/
MFC Signaling on DOD
route on tandem call from
CCIS
0
1
To provide
Not provided
147 Kind of Call Forwarding-No
Answer key assigned to
DESKCON
0
1
Call Forwarding-No Answer key assigned by
CM90 Y=00: F6068
Call Forwarding-No Answer key assigned by
CM90 Y=00: F6063
CM90
148 System operation when the
station, after holding the
other trunk (TRUNK-A), has
made a switch hook flash
while talking with another
trunk (TRUNK-B)
0
1
Broker
’s Call
TRUNK-B is held, and station returns to the
connection with TRUNK-A.
Three-way Calling
CM08>103, 104
150 Storage of the call history
(IC) when answering a trunk
call/handling of unanswered
a trunk call
0
1
To store
Not stored
CM12 Y=38
155 Calling party number is used
as the ID Code for Remote
Access to System (DISA)
0
1
Available
Not available
NOTE: Assign this data only for Ring down
connection.
CM2A Y=15, A0
156 Calling Name Display for
incoming call from ISDN/
T1-ANI/MFC-R2 route
0
1
2
3
1000-Slot Memory Block No. 03
1000-Slot Memory Block No. 02, 03
1000-Slot Memory Block No. 00-09 [8300R5]
Not provided
CM15 Y=136
NOTE: Calling Name is displayed when this command is set to “0” or “1” and CM13 Y=69 is set to “0” if a
call from sub line is income.
Continued on next page
To Next Page
Loading...
