: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
282 Calling party number relay-
ing in ISDN to ISDN/CCIS
to ISDN connection (for out-
going trunk route)
[For EU]
0
3
To provide
Not provided
CM35 Y=281
NOTE 1: This command must be set for outgoing trunk route.
NOTE 2: Calling party number relaying in ISDN tandem connection is available when both CM35 Y=281 and
CM35 Y=282 are set to 0.
284 Mobility access Prefix
[8300R7] [For EU]
2
7
Enblock Dialing Method (for Forced On PBX)
Not provided
286 Registering a fault
information when a long call
duration of trunk call occurs
0
1
Not registered
To register
CM42>182
CMEA Y=2>04A
289 Setting of PAD data from a
trunk to a station
01
15
16
17
31
NONE
-15 dB
(1 dB increment)
-1 dB
0 dB
+1 dB
(1 dB increment)
+15 dB
0 dB
+: Gain
-: Loss
NOTE: This command is effective for the following trunks.
- LDT/ODT/PRT/DTI/CCT/SIP/IPT (P2P CCIS)
Continued on next page
To Next Page
Loading...
