: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
302 Paging station (PGD(2)-
U10) access from trunk
[8300R4]
0
1
Restricted
Allow
306 Sending the Calling Party
Number when calling from
tandem connection
[8300R5]
0
1
Available
Not available
CMBA Y=44
NOTE 1: Assign this data to an outgoing trunk route that can be sent the Calling Party Number.
NOTE 2: When an outgoing trunk is SIP trunk, specify whether to send the Calling Party Number by CMBA
Y=44.
307 Calling Party Number when
calling from a station
[8300R5]
0
1
2
7
To send station number
To send Calling Party Number assigned by
CM12 Y=12, 13
To send Calling Party Number assigned by
CM12 Y=46, 47
As per CM8A Y=5XXX>176 (To send Calling
Party Number assigned by CM12 Y=12, 13
when calling to a trunk route)
CM12 Y=12, 13,
46, 47
CM8A
Y=5XXX>176
CMBA Y=44
NOTE 1: Whether to be sent My line number/Sub line number per Line Key can be selected by CM13 Y=70/71.
NOTE 2: When an outgoing trunk is SIP trunk, set the Calling Party Number by CMBA Y=44 and CM8A
Y=5XXX>176.
308 Prefix code for Calling Party
Number when calling from a
station/tandem connection
[8300R5]
X
XXXX
XXXX
NONE
Prefix code for the Calling Party Number
(1-8 digits)
X: 0-9, A (*), B (#)
Not added
CM35 Y=310, 311
309 Digits to be deleted from the
head of Calling Party
Number
[8300R5]
00
01
08
15
No digit deletion
First 1 digit deletion
First 8 digits deletion
No digit deletion
Continued on next page
To Next Page
Loading...
