: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
310 Whether to add the prefix
code for Calling Party
Number when calling from a
station
[8300R5]
0
1
To add
Not added
CM35 Y=307, 308
CM8A
Y=5XXX>176
CMBA Y=44
NOTE 1: Prefix code is added only when station number is sent as a caller ID (CM35 Y=307: 0).
NOTE 2: This data is effective when setting Station Number (without Originating Office number by CMA7
Y=06) as Calling Party Number set by CMBA Y=44 and CM8A Y=5XXX>176.
311 Whether to add the prefix
code for Calling Party
Number when calling from a
trunk
[8300R5]
0
1
To add
Not added
CM35 Y=306, 308
CMBA Y=44
NOTE: This data is effective when sending the Calling Party Number when calling from tandem connection set
by CM36 Y=306: 0.
314 Dial Mask on LCD during
talking with trunk
[8300R6]
0
1
Allow
Restricted
CM15 Y=289
NOTE: Set the second data of both CM15 Y=289 and CM35 Y=314 to “0” to be effective for Dial Mask on LCD.
318 Calling Name display for
Caller ID-station received on
Facility in ISDN message
[North America Only]
[8300R6]
0
1
Available
Not available
319 Restriction of Remote Main-
tenance via built-in modem
[8300R7]
0
1
3
Restricted by Calling party No.
All Restricted
Not Restricted
CMEC Y=8
Continued on next page
To Next Page
Loading...
