Y
1ST
DATA
MEANING
DEFAULT
2ND DATA
INCREMENT
UNIT
TIMER
0 114 Timer A of warning
SST sending for
forced release
NONE 01 02 03 .........................................................99
64 seconds
– 64 128 192 ......................................................6336
NOTE: Set the time from the start of communications
to the warning SST is sent.
Forced release is executed at 16 seconds later
from the warning SST is sent.
115 Timer B of warning
SST sending for
forced release
NONE 01 02 03 .........................................................99
64 seconds
– 64 128 192 ......................................................6336
NOTE: Set the time from the start of communications
to the warning SST is sent.
Forced release is executed at 16 seconds later
from the warning SST is sent.
116 Timer C of warning
SST sending for
forced release
NONE 01 02 03 .........................................................99
64 seconds
– 64 128 192 ......................................................6336
NOTE: Set the time from the start of communications
to the warning SST is sent.
Forced release is executed at 16 seconds later
from the warning SST is sent.
117 Interdigit Pause for
outgoing call of Trunk
Route
NONE 01 02 03 .........................................................99
1 second
99
seconds
1 2 3 ..........................................................99
NOTE: Effective only when CM35 Y=250: 0.
119 Delayed Hotline acti-
vation timer
NONE 01 02 03 .........................................................30
1 second
10
seconds
1 2 3 ..........................................................30
120 Forced release timer
when the Paging Sta-
tion [PGD(2)-U10
ADP] is not released
NONE 00 02 03 .........................................................99
4 seconds
180
seconds
0 4 8 .........................................................396
NOTE: When this data is set to “00”, forced release is
not executed.
Continued on next page
To Next Page
Loading...
