Chapter 2 PRECAUTION
2-4 NWA-033623-001 Rev.8.1
91ch2001.fm
CONDITIONS FOR USING COMMANDS
Conditions for Using Commands
NOTE 1: When CM10 Y=00: DXXX is executed, a blade reset by CME0 Y=3 is required only for LDT/
ODT/DTI.
NOTE 2: Whether a blade reset is required in these commands depends on blade type.
See PRECAUTION (2) of CM35
Continued on next page
CONDITION COMMANDS MEANINGS
Commands which require a
reset of the blade after data
setting.
• Executed by CME0 Y=3
CM04 Y=10-59>01, 02 Setting of System Services
CM05 Y=0, 1 Blade Type, Trunk Blade Number, Highway
Channel for ISDN Data Communication
CM08>644 Basic Services
CM10 Y=00: DXXX,
E000-E007
NOTE 1
Station Number, Trunk Number, Blade Num-
ber
CM13 Y=32, 33, 63 Station Class-2
CM30 Y=00 Trunk Data
CM35 Y=001, 009, 020,
023, 025, 079, 089, 104,
105, 113, 129, 144, 291
NOTE 2
Trunk Route Data
CM41 Y=0>38, 142,
Y=1>20, 22, 23, Y=2>
50-77, 80-87, Y=3>20-26,
30-44, 49-51, 60-63
System Timer Data
CMA9 ISDN (PRI) D-Channel Assignment
CMAA Y=00-02, 06, 09,
19-21, 25
DTI/BRT/PRT/CCT Blade Functions
CMAC Y=01, 03, 16 ISDN Functions
CMAE Y=00>03, 05
Y=10, 11, 15, 19, 42
ZT Operation Data Assignment
CMEE Application Blade Data Assignment
JANUARY/31/2012
To Next Page
Loading...
