NEC Univerge SV8300 - Page 484

3-428 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
GROUP CALL, MY LINE NUMBER THAT DISPLAYS THE CALLING NUMBER,
SERIAL NUMBER WITHIN THE CONFERENCE GROUP, CONFERENCE PILOT
STATION FOR THE OUTGOING CALL, PILOT STATION FOR THE SERVICE
ORIGINATING CALL FOR EACH TENANT, SUITE ROOM GROUP NUMBER
57
: Default
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
31 Serial number within
the Conference group
[8300R2]
XX YY XX: Conference
Group No. 00-15
YY: Serial No. 00-30
(within the Con-
ference group)
X-XXXXXXXX
NONE
Station No.
No data
32 Conference Pilot sta-
tion for the outgoing
call
[8300R2]
XX Conference Group No.
00-15
X-XXXXXXXX
NONE
Station No.
No data
33 Pilot station for the
service originating call
for each tenant
(for OAI SCF3)
[8300R5]
00
63
Tenant No. 00-63 X-XXXXXXXX
NONE
Pilot station number for the
service originating call
No data
NOTE: Assign one Station Hunting group by CM18 Y=0 in the combination with the Pilot station by this data
and the station number by CM10 Y=0 when using OAI SCF3.
34 Specification of Suite
Room group number
[8300R5]
XXXYY XXX: Suite Room
Group No.
000-127
YY : Serial No.
00-03 (within
the Suite Room
Group)
X-XXXXXXXX
NONE
Station No.
No data
NOTE: Assign Serial No.00 to Suite Room master station number, and assign Serial No.01-03 to Suite Room
sub station number.
~
JANUARY/14/2011
CM57