: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
00 CODEC list
between locations
XX ZZ XX: Location
number
(00-63)
ZZ : Location
number
(00-63)
0
1
2
3
4
5
NONE
CCC
Programmable CODEC List 0
(As per CM42>100-103,
110-113)
Programmable CODEC List 1
(As per CM42>120-123,
130-133)
Programmable CODEC List 2
(As per CM42>140-143,
150-153)
Programmable CODEC List 3
(As per CM42>160-163,
170-173)
Fixed CODEC List 1
(Prioritize Tone Quality)
See the table below
Fixed CODEC List 2
(Prioritize Bandwidth)
See the table below
See the table on next page.
Clear
CM42
CM12 Y=39/50
CM8A Y=5000-
5255: 173
CMAD Y=29
NOTE 1: This data setting is Valid to the voice packets that are sent to the location which is set to “ZZ” in the
first data from the location which is set to “XX” in the first data.
NOTE 2: The table below shows the setting of Fixed CODEC List 1/2.
*A-law/µ-law depends on CPU or CM04 Y=10-59.
Continued on next page
Priority
CODEC Type Payload Size
Fixed CODEC
List 1
(CM67 Y=00: 4)
Fixed CODEC
List 2
(CM67 Y=00: 5)
Fixed CODEC
List 1
(CM67 Y=00: 4)
Fixed CODEC
List 2
(CM67 Y=00: 5)
1 G.722 G.729a 40 ms. 40 ms.
2 G.711* G.711* 40 ms. 40 ms.
3
G.729a G.722 40 ms. 40 ms.
To Next Page
Loading...
