NEC Univerge SV8300 - Page 516

3-460 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
LOCATION DATA ASSIGNMENT
67
Y=10-26
: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
10 Time Zone setting
of each location
00
63
Location number XXXXX
NONE
Time Zone
(see the table below)
No Time Zone
CM02
NOTE 1: System clock should be assigned by CM02.
NOTE 2: After changing the data, system data copy to Remote Unit by CMEC Y=8 is required.
Continued on next page
~
2nd Data Time Zone
A2345 System Clock +23:45
A2330 System Clock +23:30
A2315 System Clock +23:15
A2300 System Clock +23:00
A0100 System Clock +01:00
A0045 System Clock +00:45
A0030 System Clock +00:30
A0015 System Clock +00:15
NONE No Time Zone (No time difference)
B0015 System Clock -00:15
B0030 System Clock -00:30
B0045 System Clock -00:45
B0100 System Clock -01:00
B2300 System Clock -23:00
B2315 System Clock -23:15
B2330 System Clock -23:30
B2345 System Clock -23:45
CCC Time Zone data clear
~
~
~
~
+15 minutes
increments
-15 minutes
increments
JANUARY/31/2012
CM67