3-470 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
MEMORY ALLOCATION FOR SYSTEM SPEED DIALING
71
(2) Limitation on Memory Slot Allocations
• In a single-tenant system, Tenant No. 00 can be assigned a maximum of 300 memory slots.
• Per Tenant:
Maximum of 300 memory slots
• For Hot Line-Outside/Delayed Hotline-Outside call:
Maximum of 100 memory slots (maximum number of Hot Lines/Delayed Hotlines)
• For Route Advance from Tie line to C.O. line/Direct-In Termination-CCIS:
Maximum of 64 memory slots (maximum number of Trunk Routes)
• For automatic fault information sending form built-in modem on CPU:
2 memory slots
(3) There is a maximum of 300 memory slots assigned by this command. However, if required,
another 1000-4000 memory slots can be added. These additional 1000-4000 memory slots are to
be assigned with CM08>110, 111, 112, 176, and CM73 and CM74.
(4) The abbreviated codes for System Speed Dialing are automatically determined by assigning this
command on a tenant basis, as shown below.
(5) The Resident System Program allocates 100 memory slots to Tenant No. 01.
000
001
002
019
00
01
02
19
(Memory
Slot No.)
(Abbreviated
Code)
Tenant No. 00
~
~
020
021
022
034
00
01
02
14
(Memory
Slot No.)
(Abbreviated
Code)
Tenant No. 01
~
~
035
036
037
044
00
01
02
09
(Memory
Slot No.)
(Abbreviated
Code)
Tenant No. 02
~
~
JUNE/15/2011
CM71
To Next Page
Loading...
