NEC Univerge SV8300 - Page 527

3-471 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
MEMORY ALLOCATION FOR SYSTEM SPEED DIALING
71
ASSIGNMENT PROCEDURE:
DATA TABLE:
+71+ +
KIND OF
++ +
CALLING PARTY
DATA
(2 digits)
EXE
ST
DEDE
(6 digits)
: Default
KIND OF CALLING PARTY SETTING DATA
No. MEANING DATA MEANING
00
63
Tenant No. 00
Tenant No. 63
XXX YYY
NONE
XXX: Starting Memory Slot
number in Block: 000-299
YYY: Number of Slots to
be assigned in Block: 001-300
No data
64 Exclusively for Attendant Console
[8300R2]
65 Exclusively for Hot Line-Outside/
Delayed Hotline-Outside call (Related
Command: CM52)
66 Exclusively for Route Advance from Tie
line to C.O. line (Related Command:
CM35 Y=040, CM30 Y=04, 05, CM58
Y=08, 09: CXX)/Direct-In Termination-
CCIS
Exclusively for Voice Mail Station num-
ber (Related Command: CM50 Y=10,
CM72 Y=0)
67 Exclusively for automatic fault informa-
tion sending from built-in modem on
CPU
68 Terminating number of opposite office
on alternative ISDN connection
XXX YYY
NONE
XXX: Starting Memory Slot
number in Block: 000-299
YYY: Number of Slots to
be assigned in Block: 001-032
No data
~
~
JUNE/15/2011
CM71