NEC Univerge SV8300 - Page 545

3-489 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
DIGIT CONVERSION ON DID CALL
76
: Default
Y
1ST DATA
2ND DATA
REMARKS
No. MEANING DATA MEANING
33 Whether the call
terminating
method is speci-
fied for DID
incoming call with
no CLI in Day
Mode
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
0
1
3
Specified when reason of the incom-
ing calls with no CLI is “Privacy”
Specified for all incoming call with
no CLI
Not specified
CM76 Y=34
NOTE: Assign the call terminating method by CM76 Y=34 when this command is set to 0/1.
34 Specification of
the call terminat-
ing method for
DID incoming call
with no CLI in
Day Mode
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
0
1
2
3
To transfer to the VRS/another
station/Attendant Console (assigned
by CM51 Y=33)
To reject the call termination
To terminate Multiline Terminal with
lamp indication/ringer tone/ringer
pattern (assigned by CM76 Y=37, 38,
39)
To terminate as usual
CM51 Y=33
CM76 Y=33,
37, 38, 39
35 Whether the call
terminating
method is speci-
fied for DID
incoming call with
no CLI in Night
Mode/Mode A/
Mode B
0
1
3
Specified when reason of the incom-
ing call with no CLI is “Privacy”
Specified for all incoming call with
no CLI
Not specified
CM76 Y=36
NOTE: Assign the call terminating method by CM76 Y=36 when this command is set to 0/1.
Continued on next page
JULY/18/2008
CM76