NEC Univerge SV8300 - Page 544

3-488 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
DIGIT CONVERSION ON DID CALL
76
NOTE: Number Conversion Block No. 200-999 cannot be used for this assignment.
Continued on next page
: Default
Y
1ST DATA
2ND DATA
REMARKS
No. MEANING DATA MEANING
23 Multiline Termi-
nal Ringer Tone
Pattern on DID
incoming calls
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90,
CM2A Y=50-52
0
1
2
3
4
5
6
7
Ringer Tone Pattern 0
Ringer Tone Pattern 1
Ringer Tone Pattern 2
Ringer Tone Pattern 3
Ringer Tone Pattern 4
Ringer Tone Pattern 5
Ringer Tone Pattern 6
As per CM35 Y=034/164
CM35
Y=034, 164
CM65 Y=40
NOTE: For the Ringer Tone Pattern, see CM65
Y=40.
24 DID Name assign-
ment with charac-
ter
000-199:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90,
CM2A Y=50-52
NOTE
X
X......X
NONE
Character
(Maximum 16 digits)
X: 0-9, A-Z
No data
CM15
Y=123, 136
25 DID Name assign-
ment with charac-
ter code
XXX...X
NONE
Character Code
(Maximum 32 digits, 16 characters)
See Character Code Table in
CM77.
No data
CM15
Y=123, 136
26 CID Call Routing
for DID on ISDN,
ANI, MFC
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
0
1
2
3
To provide
(Using Development Pattern 0)
To provide
(Using Development Pattern 1)
To provide
(Using Development Pattern 2)
Not provided
CM2A
Y=50-52
32 Hotel/Motel DID
number allocation
to guest station
0
1
Available
Not available
CM08>824
CM76
Y=01-04
~
JULY/18/2008
CM76