: Default
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
00
03
Setting of Soft
Key function for
each Pattern
Number (Pattern
Number 0-3)
aa bb aa : Status Number (00-11)
00: Idle State
01: During dialing
(Holding no call)
02: During dialing
(Holding a station/trunk)
03: During calling
(Holding no call)
04: During calling
(Holding a station/trunk)
05: Being called
06: When called party is busy
(Holding no call)
07: When called party is busy
(Holding a station/trunk)
08: When called party sets DND
09: Trunk Busy
10: During Speaking
(Holding no call)
11: During Speaking
(Holding a station/trunk)
bb: Soft Key Number (00-15)
00-03: Indicated on 1st display
04-07: Indicated on 2nd display
08-11: Indicated on 3rd display
12-15: Indicated on 4th display
F5002
F5003
F5014
F5015
F5016
F5017
F5018
F5019
F5029
FXXXX
NONE
Scroll key to change the
Soft key indication
Ringer Tone Changing
Dial By Name for System
Speed Dialing (300-Slot
Memory)
Dial By Name for Station
Speed Dialing
Dial By Name for System
Speed Dialing (1000-Slot
Memory Block No. 00)
Dial By Name for System
Speed Dialing (1000-Slot
Memory Block No. 01)
Dial By Name for System
Speed Dialing (1000-Slot
Memory Block No. 02)
Dial By Name for System
Speed Dialing (1000-Slot
Memory Block No. 03)
Call History
Function key (Same as
F0XXX, F1XXX, F50XX
of CM90)
See Default Data of
CM9A (Pattern No. 3).
Page 3-568
No data
NOTE: Dial By Name is available only when the Multiline Terminal is in idle
state. (Status Number of 1st data: 00)
Continued on next page
To Next Page
Loading...
