: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
10 ACM signal waiting timer after send-
ing IAI signal when originating calls
via CCIS
01
14
15
2 seconds
(2 seconds increments)
28 seconds
6 seconds
SIP trunk ringing/answer response
timer when time-out occurs alternate
routing is executed if provided
26 Calling Name Display-CCIS/SIP
trunk
NOTE: Effective when CM08>379:
0.
0
1
To provide
Not provided
CM08>379
28 Calling Party Information transfer-
ring service
0
1
To provide
Not provided
29 Multiple Call Forwarding-All Calls/
Busy Line/No Answer-CCIS
0
1
Allowed (Maximum 7 times)
Restricted (Only once)
CM08>370
CM42>72
30 Busy Lamp Field (BLF)-CCIS 0
1
To provide
Not provided
44 TOS field Precedence for IPT (P2P
CCIS) control packet
TOS: Type of Service
NOTE: This data setting is ineffec-
tive when CMA7 Y=50 is set.
0
7
15
PRECEDENCE 0
PRECEDENCE 7
PRECEDENCE 0
CM35 Y=134
CMA7 Y=71
45 Release timer for IPT (P2P CCIS)
Point-to-Multipoint connection
000
001
127
NONE
30 seconds
1 minute
127 minutes
Not released
46 Connection method for IPT (P2P
CCIS)/SIP trunk
0
1
Point-to-Multipoint
Point-to-Point
Continued on next page
To Next Page
Loading...
