: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
50 DiffServ code point setting for IPT
(P2P CCIS) control packet
00-3F
NONE
DiffServ code point
No data
CM35 Y=161
CMA7 Y=44
NOTE 1: Set this data when the router provides DiffServ QoS, if required.
DiffServ: Differentiated Services; one type of QoS.
QoS : Quality of Service
NOTE 2: When this data is set, the TOS field Precedence set by CMA7 Y=44 is ineffective.
If you want to validate the Precedence set by CMA7 Y=44, set “CCC” (data clear) for CMA7
Y=71.
NOTE 3: This data setting is required only for Point-to-Multipoint connection.
64 Trunk seizure sequence for incoming
calls
[8300R4]
[North America Only]
0
1
By allotter
From the lowest circuit number
NOTE: Trunk seizure sequence for outgoing calls can be set by CM35 Y=083.
71 SIP Profile number for control packet 00
31
NONE
Profile number for control packet
No data
77 Registration status/Manual registra-
tion sending
[8300R4]
0
1
Not registered
Registration is completed/
REGISTER is sent again
81 Baud rate for Common Signaling
Channel
0
1
2
3
7
64 Kbps
56 Kbps
48 Kbps (1)
48 Kbps (2)
64 Kbps
Continued on next page
To Next Page
Loading...
