NEC Univerge SV8300 - Page 636

3-580 NWA-033623-001 Rev.8.1
91ch3007.fm
COMMAND CODE
TITLE:
ISDN (PRI) D-CHANNEL ASSIGNMENT
A9
FUNCTION:
This command is used to assign the various data to each D-Channel for ISDN-Primary Rate Interface.
PRECAUTION:
This command requires the blade reset after data setting.
ASSIGNMENT PROCEDURE:
DATA TABLE:
BLADE RESET
ST
EXE
++ +
+
A9YY
DATA
DE
(3 digits)
++
DE
D-CHANNEL No.
(00-31)
: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
00 Trunk used as D-Channel number 000
511
NONE
DTI/PRT trunk number assigned by
CM10 Y=00
No data
CM05 Y=0: 41
CM10 Y=00
CM35 Y=093
~
NOVEMBER/12/2008
CMA9