NEC Univerge SV8300 - Page 635

3-579 NWA-033623-001 Rev.8.1
91ch3007.fm
COMMAND CODE
TITLE:
CCIS CHANNEL/IP TRUNK/SIP TRUNK DATA 2
A8
NOTE 3: Programming procedure of CMA8 Y=1 is as follows.
- For IPT (P2P CCIS), set this data IP address of destination IPT (VoIP address of destina-
tion office).
- For Point-to-Point connection to SIP trunk (CMA7 Y=46: 1), this data is not needed to as-
signed.
- For Point-to-Multipoint connection to SIP trunk (CMA7 Y=46: 0), set this data to IP ad-
dress of destination IPT (VoIP address of destination office).
APRIL/16/2010
CMA8