: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
30 SIP server IP Address 00
31
Profile number
for control
packet
aaabbb
cccddd
NONE
SIP server IP Address
aaa : 000-255
bbb: 000-255
ccc : 000-255
ddd: 001-254
No data
CMA7 Y=71
NOTE 1: This data setting is not required when the IP address for SIP server is determined by DNS resolu-
tion.
NOTE 2: For Point-to-Multipoint connection (when CMA7 Y=46 is set to “0”), the IP address assigned by
this data depends on the IP address pattern assigned by CM8A Y=5000-5255>167.
31 SIP server Port number 00
31
Profile number
for control
packet
00000
65534
NONE
SIP server Port number
No data
CM0B Y=136
CMA7 Y=71
NOTE 1: The port number of SIP server is 5060 in general.
NOTE 2: Set the same port numbers to the all ports in a network for Point-to-Multipoint connection (when
CMA7 Y=46 is set to “0”).
32 Registration number
(representative num-
ber) assignment
00
31
Profile number
for control
packet
X
X...X
NONE
Registration number
(representative number)
(Maximum 24 digits)
X: 0-9, A (*), B (#)
No data
CMA7 Y=71
CMBA Y=44
NOTE 1: CMBA Y=32 must be set when the calling number is noticed by using SIP (used as a registry for
SIP server).
NOTE 2: When the second data of CMBA Y=44 is set to “0” or “1”, the Registration number (Representa-
tive number) assigned by this command is used as the calling number.
Continued on next page
To Next Page
Loading...
