: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
44 Caller ID conversion on
SIP trunk call
00
31
Profile number
for control packet
00
01
02
03
15
Caller ID conversion
mode 0
Caller ID conversion
mode 1
Caller ID conversion
mode 2
Caller ID conversion
mode 3
Not provided
CM8A
Y=5XXX>
176
CMA7 Y=71
NOTE 1: CMBA Y=44 must be set when using Caller ID conversion on SIP trunk call.
NOTE 2: For details of Caller ID conversion mode, see NOTE 3 of CM8A Y=5XXX>176.
Page 3-527
45 Setting of SIP AoR
user name with charac-
ter
00
31
Profile number
for control packet
XXX...X
NONE
SIP AoR user name
(Maximum 32 charac-
ters)
No data
CMA7 Y=71
CMBA Y=46,
47, 54
NOTE 1: You can also confirm the SIP AoR user name set by CMBA Y=46/47/54 with this command.
NOTE 2: Set the second data to NONE for Point-to-Multipoint connection (when CMA7 Y=46 is set to “0”).
46 Setting of SIP AoR
user name with charac-
ter code (First 12 char-
acters)
00
31
Profile number
for control packet
XXX...X
NONE
SIP AoR user name
(24 digits, 12 charac-
ters fixed)
See Character
Code Table in
CM77.
No data
CMA7 Y=71
CMBA Y=45,
47, 54
NOTE 1: You can confirm the user name set by this command with CMBA Y=45.
NOTE 2: Set the second data to NONE for Point-to-Multipoint connection (when CMA7 Y=46 is set to “0”).
Continued on next page
To Next Page
Loading...
