NEC Univerge SV8300 - Page 674

3-618 NWA-033623-001 Rev.8.1
91ch3007.fm
COMMAND CODE
TITLE:
SIP PROFILE DATA
BA
Y=52-99
: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
52 DTMF out-band mode
for SIP trunk
00
31
Profile number
for control packet
03
NONE
Out-band mode (with
RFC2833)
In-band mode (Voice
pass through)
CMA7 Y=71
54 Setting of SIP AoR
user name with charac-
ter code (Last 8 charac-
ters)
XXX...X
NONE
SIP AoR user name
(16 digits, 8 charac-
ters fixed)
See Character
Code Table in
CM77.
No data
CMA7 Y=71
CMBA
Y=45-47
NOTE 1: You can confirm the user name set by this command with CMBA Y=45.
NOTE 2: Set the second data to NONE for Point-to-Multipoint connection (when CMA7 Y=46 is set to “0”).
55 Setting of SIP trunk
identity header
00
31
Profile number
for control packet
0
1
2
3
4
5
6
7
SIP-URL + tel-URL
SIP-URL
tel-URL
SIP-URL + tel-URL
only when the calling
number is not
informed
SIP-URL only when
the calling number is
not informed
tel-URL only when
the calling number is
not informed
Remote-Party-ID
only when the calling
number is not
informed
[8300R5]
No identity header
CMA7 Y=71
NOTE: Set the second data to “7” for Point-to-Multipoint connection (when CMA7 Y=46 is set to “0”).
Continued on next page
RESET
~
RESET
RESET
~
JUNE/15/2011
CMBA