NEC Univerge SV8300 - Page 68

3-12 NWA-033623-001 Rev.8.1
91ch3001.fm
COMMAND CODE
TITLE:
SETTING OF SYSTEM SERVICES
04
: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING
DATA MEANING DATA MEANING
00 Setting of System
Services (a)
02 Default setting pattern for
Multiline Terminal
(System Base)
See Fixed pattern and
Programmable pattern
00
01
02
03
NONE
Default setting is not
provided
Fixed pattern 2
Fixed pattern 3
Programmable pattern 1
(As per CM90 Y=10)
Fixed pattern 1
CM10
NOTE: When this data is set to “0”, Fixed keys (Key No. 90-98) are set the same as
Fixed pattern 1-3 automatically.
Continued on next page
JUNE/15/2011
CM04