: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
100 Setting of Authentica-
tion user name when
registering to/sending
from the SIP server
with character code
(Middle 12 characters)
00
31
Profile number
for control packet
XXX...X
NONE
User name
(24 digits, 12 charac-
ters fixed)
See Character
Code Table in
CM77.
No data
CMA7 Y=71
CMBA Y=72,
73, 101
NOTE 1: When the character code to be set is less than the number of digits necessary, add the character
code FF.
NOTE 2: You can confirm the user name set by this command with CMBA Y=72.
NOTE 3: Set the second data to NONE for Point-to-Multipoint connection (when CMA7 Y=46 is set to “0”).
101 Setting of Authentica-
tion user name when
registering to/sending
from the SIP server
with character code
(Last 8 characters)
00
31
Profile number
for control packet
XXX...X
NONE
User name
(16 digits, 8 charac-
ters fixed)
See Character
Code Table in
CM77.
No data
CMA7 Y=71
CMBA Y=72,
73, 100
NOTE 1: When the character code to be set is less than the number of digits necessary, add the character
code FF.
NOTE 2: You can confirm the user name set by this command with CMBA Y=72.
NOTE 3: Set the second data to NONE for Point-to-Multipoint connection (when CMA7 Y=46 is set to “0”).
102 Setting of Authentica-
tion password when
registering to/sending
from the SIP server
with character code
(Middle 12 characters)
00
31
Profile number
for control packet
XXX...X
NONE
Password
(24 digits, 12 charac-
ters fixed)
See Character
Code Table in
CM77.
No data
CMA7 Y=71
CMBA Y=74,
75, 103
NOTE 1: When the character code to be set is less than the number of digits necessary, add the character
code FF.
NOTE 2: You can confirm the password set by this command with CMBA Y=74.
NOTE 3: Set the second data to NONE for Point-to-Multipoint connection (when CMA7 Y=46 is set to “0”).
Continued on next page
To Next Page
Loading...
