NEC Univerge SV8300 - Page 74

3-18 NWA-033623-001 Rev.8.1
91ch3001.fm
COMMAND CODE
TITLE:
SETTING OF SYSTEM SERVICES
04
: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING
DATA MEANING DATA MEANING
01 Setting of System
Services (b)
01 Connection port for MCI
[8300R1]
0
1
7
RS1 on CPU
RS2 on CPU
No data
MCI
[8300R2 or later]
0
7
Available
Not available
02 Purpose of Caller ID
sender
[North America/EU]
0
7
Caller ID-Station
No data
CM08>507
CM10/
CM50
Y=00>8
03 Handling of CPU call
information
2
7
Available
Not available
CM04
Y=01>06
NOTE: This command is not effective for the SMDR.
05 Destination to send a call
information
0
1
7
SMDR terminal via
LAN port
PMS
SMDR terminal via RS
port
06 Destination to send a call
information which
received from Local
Office
0
1
3
SMDR terminal via
LAN port
RS port (To output to
RS1/RS2 port set by
CM40 Y=00)
Not output
CM04
Y=01>03
CM40 Y=00
07 SMDR Message Format
on RS-232C and Local
Office for Centralized
Billing-CCIS
00
15
Extended NEAX 2400
IMS Format
Former NEAX 2400
IMS Format
08 SMDR Message Format
on IP
00
15
Extended NEAX 2400
IMS Format
Former NEAX 2400
IMS Format
Continued on next page
JANUARY/31/2012
CM04