3-688 NWA-033623-001 Rev.8.1
91ch3008.fm
COMMAND CODE
TITLE:
MAINTENANCE BY PCPro/CAT
EC
System Data Copy
NOTE 10: You can assign only “0” to the second data. “1” is displayed as the second data while the
system data being copied.
NOTE 11: When Secondary unit is normal mode in Failover system, all system data of Primary unit
can be copied to Secondary unit by this command.
Day Mode/Night Mode Apply
NOTE 12: This data is effective only when the second data is set to 0.
NOTE 13: This command is executed after CM08>577 is set, or when the station tenant number of My
Line is changed by CM12 Y=04.
: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
8 System data copy
from the Main unit
to Remote units
00
02
50
All Remote units
Remote unit No. 02
Remote unit No. 50
0
1
3
Start to copy system
data
Now copying/Sys-
tem data copy state
can be read
Stand by/System
data copy state can
be read
NOTE 10
NOTE 11
CM43 Y=7
: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
9 Applying Day
Mode/Night Mode
to all Multiline Ter-
minals
0 Day Mode/Night
Mode applying
0
1
3
Start to apply
Now applying
Stand by
NOTE 12
NOTE 13
CM08>577
CM12 Y=04
JUNE/15/2011
CMEC
To Next Page
Loading...
