: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING
DATA MEANING DATA MEANING
01 Setting of System
Services (b)
17 Maximum number of DSP
resource used by Mobility
Access
[8300R6]
01
32
NONE
Maximum number of
DSP resource
24
NOTE 1: Assign the maximum number of DSP resource for Mobility Access sufficiently.
DSP resource is shared with originating/terminating/Call Forwarding-All
calls in Mobility Access and originating/terminating incoming and outgoing
calls.
NOTE 2: When DSP resource is occupied, Mobility Access and originating/ terminating
incoming and outgoing calls are restricted.
NOTE 3: When SIP trunk (PZ-64IPLC-A/ PZ-128IPLC-A) is used, DSP resource for
Mobility Access is not used for a detection of Disabling service activation dial/
Hooking dial.
02 Combination of lan-
guage indicated number
and speech synthesis
language
[8300R2]
1
9
Language indicated num-
ber
01
02
06
08
CCC
NONE
Japanese announcement
English announcement
Chinese announcement
Korean announcement
Clear
English announcement
CM04 Y=03
03 Combination of lan-
guage indicated number
and Multiline Terminal
information Printout/
Display language Print-
out
[8300R2]
1
9
Language indicated num-
ber
01
02
06
08
CCC
NONE
Japanese
English
Chinese
Korean
Clear
See NOTE
CM04 Y=02
NOTE: If 2nd data is NONE, combination of language indicated number and Multiline Terminal information
Printout/Display language Printout is set as follows.
Language indicated number
Language Information
1JPN
2ENG
6CHI
8KOR
Continued on next page
To Next Page
Loading...
