NEC Univerge SV8300 - Page 767

3-711 NWA-033623-001 Rev.8.1
91ch3008.fm
COMMAND CODE
TITLE:
REMOTE PROGRAM DOWNLOAD INFORMATION READ,
FAILOVER INFORMATION READ
FB
NOTE 1: When the first data is set to “XX16”, the meanings of readout data is as follows.
- Readout data “00” : Standard CPU (Normal mode)
- Readout data “10” : CPU for Remote Unit only (Normal mode)
- Readout data “NONE”: Disconnected/Survival mode
NOTE 2: When PCPro is connected to the Main Unit, type of CPU which is controlled under normal
mode is confirmed by this command. When CPU which is disconnected to the system or con-
trolled under survival mode, type of CPU is not confirmed and “NONE” is displayed as
readout data.
NOTE 3: When the first data is set to “XX17”, the meanings of readout data is as follows.
- Readout data “0” : CPU0
- Readout data “1” : CPU1
- Readout data “NONE”: Not provided (Accommodated in 1U module)
Continued on next page
Y 1ST DATA READOUT DATA
No. MEANING DATA MEANING DATA MEANING
10 Remote Program
Information Read
(For Stand by
CPU)
[8300R4]
01 bb bb : CPU program information
02 : SC No.
03 : Official Version
04 : Official Revision
06 : Year, Month, Day
17 : CPU0/CPU1 recognition
NOTE 3
22 : Upgraded side of CPU blade: SC No.
23 : Upgraded side of CPU blade: Official
Ver si on
24 : Upgraded side of CPU blade: Official
Revision
26 : Upgraded side of CPU blade: Year,
Month, Day
42 : Outdated side of CPU blade: SC No.
43 : Outdated side of CPU blade: Official
Ver si on
44 : Outdated side of CPU blade: Official
Revision
46 : Outdated side of CPU blade: Year,
Month, Day
X
XXXXX
XXXXX
Revision Table
~
JANUARY/31/2012
CMFB