: Default
BASIC SERVICE SETTING DATA
101 When CM08>102: 0 for Single Line Telephone
(Related command: CM35 Y=148)
0
1
The call with STA-B is disconnected,
and STA-A returns to STA-C
Three Party Conference
102 When the station (STA-A), after holding the other station (STA-
C), has made a switch hook flash while talking with another sta-
tion (STA-B)
(Related command: CM35 Y=148)
NOTE: This data is applied to single line telephone station.
0
1
As per CM08>101
STA-B is held, and STA-A returns to
the connection with STA-C
(Broker’s Call)
103 When the station (STA-A), after holding a C.O. call, has made a
switch hook flash while talking with another station (STA-B)
(Related command: CM35 Y=148)
NOTE: This data is applied to single line telephone station.
0
1
As per CM08>104
STA-B is held, and STA-A returns to
the connection with C.O. line (Bro-
ker’s Call)
104 When CM08>103: 0
(Related command: CM35 Y=148)
0
1
The call with STA-B is disconnected,
and STA-A returns to the C.O. line
Three Party Conference
109 Periodic record tone on live record 0
1
To send
Not sent
110 1000-Slot Memory Block number “03” for Station Speed Dial-
ing is used as the Memory Block for System Speed Dialing
0
1
Available
See CM20 Y=0-3: A150
Not available
111 1000-Slot Memory Block number “01” for Station Speed Dial-
ing is used as the Memory Block for System Speed Dialing
0
1
Available
See CM20 Y=0-3: A151
Not available
112 1000-Slot Memory Block number “00” for Station Speed Dial-
ing is used as the Memory Block for System Speed Dialing
0
1
Available
See CM20 Y=0-3: A152
Not available
113 Outgoing C.O. line call from Station-to-Station connection 0
1
Restricted
Allowed
114 Answer preference for enhanced Trunk Line Appearance
(Trunk Direct Appearances)
0
1
Display 2-digit trunk ID code (last
two digits assigned by CM30 Y=19)
Display 4-digit trunk ID code (four
digits assigned by CM30 Y=19)
See CM30 Y=19
Continued on next page
To Next Page
Loading...
