EasyManua.ls Logo

NEC Univerge SV8300 - Page 94

NEC Univerge SV8300
804 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-38 NWA-033623-001 Rev.8.1
91ch3001.fm
COMMAND CODE
TITLE:
BASIC SERVICES
08
: Default
BASIC SERVICE SETTING DATA
115 A station user is allowed to break into a call between a C.O. line
party and another station by Executive Right of Way (Executive
Override)
0
1
Restricted
Allowed
116 Answer Key rings on TAS and Pooled Line 0
1
To provide
Not provided
See CM90 Y=00: F40XX
117 While the station (STA-A) is talking with another station (STA-
B) after consultation hold with a C.O. call, when STA-B has
hung up
0
1
STA-A returns to the call with C.O.
line
STA-A hears ROT
119 Toll Diversion
When the station dials restricted area code after C.O. trunk
access code
0
1
Diversion to attendant “ICPT”
Station receives ROT
120 Name Display (Guest Name Display)
Time to go back to Date and Time display after the call
answered
0
1
10 seconds later
6 seconds later
121 Name Display (Guest Name Display) after the call answered 0
1
Until call finished
As per CM08>120
123 When a station has originated a call to C.O. line via the trunk
route assigned to 1 by CM35 Y=004, and answer signal has not
been detected within the preprogrammed time after dialing, a
pseudo-answer signal is generated
See CM41 Y=0>03
0
1
To send
Not sent
[Australia Only]
0
1
Not sent
To send
[Other than Australia]
124 Multiple connections of Voice Response System on Announce-
ment Service
0
1
Available
Not available (Single connection)
125 Unsupervised transfer
After holding an incoming C.O. call, an attendant dials a sta-
tion. After connection with the attendant, if the called station
goes on-hook, the attendant returns to the held call.
[8300R2]
0
1
Return to held call
Attendant hears ROT
Continued on next page
JANUARY/14/2011
CM08

Table of Contents

Other manuals for NEC Univerge SV8300

Related product manuals