d. To specify a priority for the VLAN, in the Priority (0 ~ 7) field, enter a value from 0 to 7.
e. Click the Apply button.
Your settings are saved for the Internet virtual interface.
6. From the menu above the Enable This Interface check box, select IPTV.
The previous figure shows only the top of the Internet Setup page.
7. Configure a VLAN for the IPTV virtual interface:
a. Make sure that the Enable This Interface check box is selected for the IPTV virtual interface.
If you already enabled and configured the IPTV virtual interface, the check box is selected.
b. Select the Use VLANID check box.
c. Enter a VLAN ID that applies to the IPTV virtual interface.
The VLAN ID can be in a range from 0 to 4094.The default VLAN ID is 0.
d. To specify a priority for the VLAN, in the Priority (0 ~ 7) field, enter a value from 0 to 7.
e. Click the Apply button.
Your settings are saved for the IPTV virtual interface.
For information about enabling bridge mode for the IPTV virtual interface, see one of
the following sections:
Note
• Manually Set Up an ADSL Internet Connection on page 41
• Manually Set Up a VDSL Internet Connection on page 51
• Manually Set Up a Cable Internet Connection on page 60
Manage the WAN and LAN Network Settings
175
AC1200 WiFi VDSL/ADSL Modem Router Model D6220
To Next Page
Loading...
