d. Clear the browser cache.
e. If the computer is set to a static (fixed) IP address (this setting is uncommon), either change the
computer to obtain an IP address automatically from the modem router through DHCP, or change
the IP address of the computer to a static IP address in the 192.168.0.2–192.168.0.254 range.
13. From the Country menu, select the country in which you use the modem router.
14. From the Internet Service Provider menu, select the Internet service provider (ISP) that you are using.
If your ISP is not in the menu, select Other.
15. Select the Yes radio button.
16. Click the Next button.
When the modem router is connected to the Internet, the Congratulations! page displays, and you
successfully completed the setup process.The Congratulations! page that displays is similar to the one
that is shown in the following figure.
If the Congratulations! page does not yet display, other pages might display and you might need to
provide more information, in which case you must continue with Step 18.The pages that display depend
on your type of ISP connection and configuration.
17. Click the Next button.
You are prompted to download and install the free NETGEAR Desktop genie app and the free
ReadySHARE Vault app.
This step concludes a successful setup process. If you are connected to the Internet, you can ignore
Step 18 through Step 20.
Install and Access the Modem Router and Its Network
28
AC1200 WiFi VDSL/ADSL Modem Router Model D6220
To Next Page
Loading...
Need help?
General
Weight and Dimensions
