NETGEAR M4100 Series User Manual

Configure System Information
41
M4100 Series Managed Switch
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select System
 Management > Time  Time Configuration
The Time Configuration screen displays.
8. Scroll down to view the SNTP Global Status
.
The following table describes the SNTP Global Status fields.
Table 8. SNTP Global Status
Field Description
Version Specifies the SNTP version the client supports.
Supported Mode Specifies the SNTP modes the client supports. Multiple modes can be
supported by a client.
Last Update Time Specifies the local date and time (UTC) the SNTP client last updated
the system clock.
Last Attempt Time Specifies the local date and time (UTC) of the last SNTP request or
receipt of an unsolicited message.

NETGEAR M4100 Series Specifications

General

Model	M4100 Series
Switch Type	Managed
Form Factor	Rack-mountable
Port Configuration	24 or 48 ports
Ethernet Ports	10/100/1000 Mbps
PoE Support	Available on some models (PoE and PoE+)
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
QoS	Yes
Stackable	Yes
Ports	24 or 48
Jumbo Frame Support	Yes
Security Features	ACL, 802.1X, RADIUS, TACACS+
Operating Temperature	0° to 50° C (32° to 122° F)
Storage Temperature	-20° to 70° C (-4° to 158° F)
Power Supply	Internal power supply