NETGEAR M4100 Series User Manual

Configure System Information
42
M4100 Series Managed Switch
Last Attempt Status Specifies the status of the last SNTP request or unsolicited message
for both unicast and broadcast modes. If no message was received
from a server, a status of Other is displayed. These values are
appropriate for all operational modes.
• Other. None of the following enumeration values.
• Success. The SNTP operation was successful and the system time
was updated.
• Request Timed Out. A directed SNTP request timed out without
receiving a response from the SNTP server.
• Bad Date Encoded. The time provided by the SNTP server is not
valid.
• Version Not Supported. The SNTP version supported by the server
is not compatible with the version supported by the client.
• Server Unsynchronized. The SNTP server is not synchronized with
its peers. This is indicated through the leap indicator field on the
SNTP message.
• Server Kiss Of Death. The SNTP server indicated that no further
queries were to be sent to this server. This is indicated by a
stratum field equal to 0 in a message received from a server.
Server IP Address Specifies the IP address of the server for the last received valid packet.
If no message was received from any server, an empty string is shown.
Address Type Specifies the address type of the SNTP server address for the last
received valid packet.
Server Stratum Specifies the claimed stratum of the server for the last received valid
packet.
Reference Clock Id Specifies the reference clock identifier of the server for the last received
valid packet.
Server Mode Specifies the mode of the server for the last received valid packet.
Unicast Server Max Entries Specifies the maximum number of unicast server entries that can be
configured on this client.
Unicast Server Current Entries Specifies the number of current valid unicast server entries configured
for this client.
Broadcast Count Specifies the number of unsolicited broadcast SNTP messages that
were received and processed by the SNTP client since last reboot.
Table 8. SNTP Global Status (continued)
Field Description

NETGEAR M4100 Series Specifications

General

Model	M4100 Series
Switch Type	Managed
Form Factor	Rack-mountable
Port Configuration	24 or 48 ports
Ethernet Ports	10/100/1000 Mbps
PoE Support	Available on some models (PoE and PoE+)
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
QoS	Yes
Stackable	Yes
Ports	24 or 48
Jumbo Frame Support	Yes
Security Features	ACL, 802.1X, RADIUS, TACACS+
Operating Temperature	0° to 50° C (32° to 122° F)
Storage Temperature	-20° to 70° C (-4° to 158° F)
Power Supply	Internal power supply