Newport 1936-R series - Page 10

10 Preface
3.1 Startup Procedure ....................................................................... 34
3.2 Front Panel Layout ..................................................................... 34
3.2.1 Front Panel Elements .......................................................35
3.2.2 Understanding the Main Screen ......................................35
3.3 Rear Panel Layout ...................................................................... 35
3.3.1 Elements That Vary by Model (on back panel) ...............35
3.3.2 Panel Layout ....................................................................36
3.3.3 Changing Voltage Settings ..............................................38
3.4 Rack Mounting the 1936/2936 Series ........................................ 39
4 System Operation 42
4.1 Front Panel Keys ........................................................................ 42
4.1.1 Power Switch ...................................................................42
4.1.2 Setup/Enter Key ...............................................................43
4.1.3 Esc Key ............................................................................44
4.1.4 Navigation and Selection Keys .......................................44
4.1.4.1 Channel Swapping ................................................ 44
4.1.4.2 Navigation ............................................................. 45
4.1.5 Soft Keys .........................................................................45
4.1.6 Dedicated Keys ................................................................45
4.1.6.1 Range .................................................................... 46
4.1.6.2 Mode ..................................................................... 47
4.1.6.3 Hold....................................................................... 47
4.1.6.4 Filter ...................................................................... 47
4.1.6.5 Lambda (λ) Key .................................................... 48
4.1.6.6 Set Zero Offset (Zero Key) ................................... 49
4.2 Measurement Settings ................................................................ 49
4.2.1 Changing the Measurement Settings ...............................49
4.2.1.1 Wavelength Selection ........................................... 49
4.2.1.2 Range Selection and Range Type (Rng. type) ...... 49
4.2.1.3 Attenuator On/Off ................................................. 50
4.2.1.4 Analog and Digital Filter Selection ...................... 50
4.2.1.5 Units Selection ...................................................... 50
4.2.1.6 Mode Selection ..................................................... 51
4.2.1.7 Spot Size ............................................................... 51
4.2.1.8 Number of Digits Setting ...................................... 51
4.2.1.9 Offset Field ........................................................... 51
4.2.2 Detector Information .......................................................51
4.3 Trigger Setup .............................................................................. 52
4.3.1 Trigger Delay ...................................................................52
4.3.2 Trigger Start .....................................................................52
4.3.3 Trigger Stop .....................................................................53
4.4 Wavelength Setting .................................................................... 53
4.5 Display Color .............................................................................. 54