143 Preface 143
Returns the longest calibrated wavelength in
nanometers.
Returns current range’s maximum readable power.
Returns the shortest calibrated wavelength in
nanometers.
Returns the currently selected acquisition mode.
Returns the power in the selected units.
Returns the power with status.
Selects the gain stage when making readings with the
detector head within a range from 0 to 5 (with zero
being the highest).
Returns an integer indicating the current range.
Gets the responsivity currently used for making power
calculations.
Disables or enables the acquisition of data.
Returns the present acquisition mode.
Return statistics buffer maximum value.
Return statistics buffer mean value.
Return statistics buffer minimum value.
Return statistics buffer maximum-minimum value.
Return statistics buffer standard deviation value.
Returns the 918 detector's temperature in degrees
Celsius.
Disables or enables thermopile prediction algorithm
Returns the present thermopile prediction algorithm
state
Set external trigger enable.
Return external trigger enable.
Set external trigger edge select.
Return external trigger edge select.
Set external trigger holdoff time.
Return external trigger holdoff time.
Selects the units for readings.
Returns an integer indicating the selected units.
Sets the user reference value for use in relative or dB
readings.
Returns the user reference value.
Sets the user reference value for use in relative or dB
readings as the present reading.
Sets the zeroing value with the present reading.
Table 7 Legacy Commands Reference
To Next Page
Loading...
