Newport 1936-R series - Pm:ref:value; Pm:ref:store; Pm:responsivity

104 Communication Command Reference
The parameter <val>is of type <number>.
Function
This command provides a means of directly storing a reference value to be
used in linear and logarithmic (dB) relative measurements. The units of this
value are the current units being used by the instrument.
Related Commands: PM:REF:STOre,PM:REF:VALue?
8.3.3.66 PM:REF:VALue?
Description Reference Value Query
Syntax PM:REF:VALue?
Parameters None
Function
This query returns the user defined reference value. The units of this value
are the current units being used by the instrument.
Returns <refval>
<refval> is of type <number>
Related Commands: PM:REF:STOre,PM:REF:VALue
8.3.3.67 PM:REF:STOre
Description Reference Value Store
Syntax PM:REF:STOre
Parameters None
Function
This command takes the latest reading and stores it as a reference reading to
be used when making relative linear and dB measurements. The units of this
value are the current units being used by the instrument.
Related Commands: PM:REF:VALue,PM:REF:VALue?
8.3.3.68 PM:RESPonsivity?
Description Responsivity query
Syntax PM:RESP?
Remarks The PM:RESP? query returns the responsivity currently
used in making power calculations.
Response Type Description
Responsivity float Power meter responsivity
Related Commands: PM:UNITS?, PM:PWS?