24 Safety Precautions
1.2.2 General Cautions
Observe these cautions when operating or servicing this equipment:
Before applying power, carefully read the warning label placed over the
AC power input receptacle in back of the instrument.
Figure 13 AC Receptacle Warning Label
If this equipment is used in a manner not specified in this manual, the
protection provided by this equipment may be impaired.
To prevent damage to equipment when replacing fuses, locate and
correct the problem that caused the fuse to blow before re-applying
power.
Do not block ventilation openings.
Do not position this product in such a manner that would make it
difficult to disconnect the power cord.
Use only the specified replacement parts.
Follow precautions for static sensitive devices when handling this
equipment.
This product should only be powered as described in the manual.
There are no user-serviceable parts inside the 1936/2936 Series Optical
Power Meters.
To prevent damage to the equipment, read the instructions in the
equipment manual for proper input voltage.
Adhere to good laser safety practices when using this equipment.