Newport 1936-R series User Manual

86 Communication Command Reference
Remarks The ECHO command is used to turn ON or OFF the
echoing of commands sent to the power meter over RS-232
communication interface. By default, the echo is turned
ON.
Response Value Description
echo set 0 Echo OFF
1 Echo ON
Related Commands: ECHO?
8.3.3.9 ECHO?
Description Echo query
Syntax ECHO?
Remarks The ECHO? query returns the echo status of the power
meter.
Response Value Description
status 0 Echo OFF
1 Echo ON
Related Commands: ECHO
8.3.3.10 ERRors?
Description Error query
Syntax ERRors?
Remarks The ERRors? query returns a single error number that has
occurred since the last query. This error is indicated by a
number that corresponds to the type of error that occurred.
This command also clears the read error from the Error
buffer.
Response Type Description
Error code int Error code number per Appendix B, 0 if no
errors
Related Commands: ERRSTR?
8.3.3.11 ERRSTR?
Description Error string query
Syntax ERRSTR?
Remarks The ERRSTR? query returns a single error number
along with the corresponding error text string that have
occurred since the last error query.

Newport 1936-R series Specifications

General

Brand	Newport
Model	1936-R series
Category	Measuring Instruments
Language	English