Newport 1936-R series User Manual

114 Communication Command Reference
Related Commands: PM:TRIG:STOP
8.3.3.99 PM:TRIG:TIME
Description This command sets the time duration that indicates a trigger
stop condition. The power meter will stop taking further measurements if the
time from trigger start exceeds time duration specified by this command, and
if trigger stop option is set to time.
Syntax PM:TRIG:TIME value
Parameters
The parameter <value> is of type <number>
Argument Value Description
value int Time (milli-seconds)
Related Commands: PM:TRIG:STOP
8.3.3.100 PM:TRIG:TIME?
Description This command returns the time duration that indicates a
trigger stop condition.
Syntax PM:TRIG:TIME?
Parameters None
Related Commands: PM:TRIG:STOP
8.3.3.101 PM:UNITs
Description Units select
Syntax PM:UNITS units
Remarks The PM:UNITS command selects the units for readings.
Argument Value Description
units 0 Amps
1 Volts
2 Watts
3 Watts/cm
2
4 Joules
5 Joules/cm
2
6 dBm
7-10 Reserved
11 Sun
Related Commands: PM:MODE?

Newport 1936-R series Specifications

General

Brand	Newport
Model	1936-R series
Category	Measuring Instruments
Language	English