82 Communication Command Reference
Returns the currently selected acquisition mode.
Returns the power in the selected units.
Returns the power with status.
Selects the gain stage when making readings with the detector
head within a range from 0 to 7 (with zero being the highest
gain).
Returns an integer indicating the current range.
Sets the user reference value for use in relative or dB readings.
Returns the user reference value.
Sets the user reference value for use in relative or dB readings
as the present reading.
Gets the responsivity currently used for making power
calculations.
Disables or enables the acquisition of data.
Returns the present acquisition mode.
Set saturation current density or power level
Query saturation current density or power level
Sets the detector spot size
Returns the detector spot size
Returns statistics buffer maximum value.
Returns statistics buffer mean value.
Returns statistics buffer minimum value.
Returns statistics buffer maximum-minimum value.
Returns statistics buffer standard deviation value.
Returns the 918 detector's temperature in degrees Celsius.
Disables or enables thermopile prediction algorithm
Returns the present thermopile prediction algorithm state
Set external trigger enable.
Returns external trigger enable.
Set external trigger edge select.
Returns external trigger edge select.
Set external trigger hold off time.
Returns external trigger hold off time.
Set the optional start event
Returns optional start event
Set the optional stop event
Returns optional start event
Returns the trigger state
Set the measurement level for trigger stop condition
Returns the measurement set level for trigger stop condition
Set the time duration for trigger stop condition
Returns the time duration for trigger stop condition
Selects the units for readings.
Returns an integer indicating the selected units.
Sets the zeroing value with the present reading.
Table 3 Tree Level Commands/Queries Summary
8.3.2 Display Commands
8.3.2.1 DISP:BRIGHT
Description Display brightness command
To Next Page
Loading...
Need help?
General
