Newport 1936-R series - Pm:trig:stop; Pm:trig:state

112 Communication Command Reference
Parameters None
Function
This query returns the TRIGGER START condition.
Related Commands: PM:TRIG: START
8.3.3.93 PM:TRIG:STOP
Description This command sets the optional stop event.
Syntax PM:TRIG:STOP <option>
Parameters
The parameter <option> is of type <number> and is an integer from 0 to 6.
Argument Value Description
option 0 The measurement never stops
1 Measurement stops when an external trigger
occurs
2 Measurement stops when a designated Soft
key is pressed
3 Measurement stops when PM:TRIG:STATE
0 command is issued.
4 Measurement stops when a pre-specified
measurement level (PM:TRIG:VALUE) is
reached
5 Measurement stops when a pre-specified
time interval (PM:TRIG:TIME) from
TRIGGER START has been reached
Related Commands: PM:TRIG: STOP?
8.3.3.94 PM:TRIG:STOP?
Description Trigger STOP Query
Syntax PM:TRIG:STOP?
Parameters None
Function
This query returns the TRIGGER STOP condition.
Related Commands: PM:TRIG: STOP
8.3.3.95 PM:TRIG:STATE
Description This command sets the trigger state