20
The MG3000 maintains compatibility with the various remote-control models of
the Linear-HCS brand.
The capture of the ACTIVE TAG serial can be done from the
QUICK REGISTRATION screen or from the ADD USER - AC-
TIVE TAG screen. Turn the Active Tag on and o twice, within
an interval of less than 3 seconds or until the screen advances
to the screen with the elds for lling in the user data. After
this procedure, proceed with the registration according to the
instructions in 10.2.7.
10.2.2 ACTIVE TAG
Figure 10.2.1.a
Figure 10.2.1.b
Figure 10.2.1c
Figure 10.2.2.a
Figure 10.2.2.b
- ENGLISH -
223
To Next Page
Loading...
Need help?
General
