59
Figure 11.5.a
Figure 11.5.b
The wake up doorman option selected from the “ADVANCED MENU 1/2”
allows the “SILENT ALARM” to be enabled, which, in the event of an access
ocer wake up event, the audible alert (intermittent beeps) will not sound.
The option “SECURITY CABIN DEVICE” allows restricting the alarm of wake
up doorman to be turned o, only by activating it from the BASE BIOMETRICS
connected to the RS485, by the user registered with the digital registered as
“DOORMAN”. In order that the event “WAKE UP NOT ANSWERED” is not ge-
nerated, press the “RESET” key or validate the doorman’s biometrics during the
display of time-out messages.
Proceeding to the screen “WAKE UP DOORMAN 2/2”, it is possible to congure
the delay time for triggering the door alarm relay, “RELAY TIME”, for integration
with local or remote alarm centers (via dialers), sirens or lamps (use external
relay of the Terminal Block Module). The time to trigger the relay signal can vary
from 1 to 30 seconds, after the fth and last timeout warning. The option “RELAY
RESET TIME”, can help, for example, in cases where the MG3000 is not monito-
red by an operator, resetting the trigger automatically after the exhaustion of the
time set for this parameter (from 1 to 255s).
11.5 WAKE UP DOORMAN ACCESS
- ENGLISH -
262
To Next Page
Loading...
