84
11.12 ROUTES
NOTE: The use of “ROUTES” is only valid when the MG3000 is used with
RMF3004 Receivers or 4A Multifunction Receivers.
The option “ROUTES”, when enabled [item 11.6.7], replaces the qualication
selection screen during the registration procedure. In this case, the user’s acti-
vation or access permission ceases to be by Receiver address and becomes by
output (relay/scanner). This type of conguration enables a more specic control
over the users’ access permission.
The holiday dates to be considered in the group denitions (maximum 10 dates)
must be entered one by one. To do this, access the Time Groups 4/4 option and
set the dates. Always click on “RECORD” before returning or exiting the menu
[Figure 11.11.e].
11.11.2 CONFIGURING HOLIDAY DATES
Figure 11.11.d
Figure 11.11.e
- ENGLISH -
287
To Next Page
Loading...
Need help?
General
