34
10.5 DATE AND TIME
The date and time of the equipment must be set correctly since all event records
will have a corresponding time for easy identication, being viewed correctly by
the PC through a dedicated software.
To adjust the equipment’s date and time, in the basic menu, select the “Date and
Time” option. Slide the cursor and click on “SAVE”.
The clock can be adjusted automatically when the MG3000 is connected to the
internet using the NTP (Network Time Protocol) option.
Figure 10.5.a
Figure 10.5.b
- ENGLISH -
237
To Next Page
Loading...
Need help?
General
