57
If a time is programmed in this option, in operating mode, the keys programmed
to activate the relays at the receivers will be activated only within the program-
med time and after receiving a signal from a triggering device related to the pro-
gramming of this key. In other words, the access ocer only opens the door
after the resident sends a signal via the registered device. After changing the
settings, press “SAVE” so that the conguration is saved in the internal memory.
The “PANIC” option allows immediate activation of panic by the buttons B1, B2,
B3 or B4 on the remote control. Panic is also activated in normal operation, by
pressing any button on a registered remote control for more than 3 seconds, and
this function, called “By time”, can be disabled via the same menu.
11.4 PANIC
Figure 11.3.2.a
Figure 11.4.a
- ENGLISH -
260
To Next Page
Loading...
