Nice MG3000 User Manual

91
- Physical address (read only): or “MAC Address” of the Ethernet interface;
- Host: name (maximum 15 characters) for local network identication (Net-
BIOS);
- Enable DHCP: option to obtain IP addresses automatically, if the local network
has an active DHCP Server;
- IP address: unique address on the local network (IPv4 Protocol);
- Default gateway: hub (or router) address of the local network;
- Subnet mask: address for identication of the network segment;
- Preferred DNS server: address for remote host resolution;
- Alternative DNS server: alternative address for remote host resolution (op-
tional).
Displays and allows changing the primary and secondary TCP (and UDP)
communication of the MG3000.
NOTE: Refer to the documentation for the integration software, or contact Nice
Brazil for more information.
Basic communication path, with TCP port operating only in “Server Mode”. In
“Server Mode”, the MG3000 awaits the connection of a TCP client (socket) to
carry out data tra󰀩c.
14.3 COMMUNICATION
14.3.1 MAIN COMMUNICATION
Figure 14.2.a
- ENGLISH -
294

Nice MG3000 Specifications

General

Brand	Nice
Model	MG3000
Category	Controller
Language	English