90
It is possible to congure some parameters of the MG3000 through the internal
HTML page. To obtain access, type in your Internet browser the IP address of the
MG3000.
14. CONFIGURATION - INTERNAL HTML HOMEPAGE
FACTORY DEFAULT SETTINGS
IP 192.168.0.10
Access http://192.168.0.10/
User admin
Password nice
Displays the MG3000 rmware version (consisting of 1 uppercase letter, 3 num-
bers and 1 lowercase letter), as well as the number of triggering devices and
events in the memory.
Displays and allows you to change the IP addresses, as shown below.
14.1 MAIN
14.2 LOCAL NETWORK
Figure 14.1.a
- ENGLISH -
293
To Next Page
Loading...
